 |
Plasma cutting device ForCUT 203W is an efficient machine with modern design for manual and for machine cutting of all electrically conductive materials (steel, inoxidable steel, aluminium, copper, brass, etc.) It is equipped with interface for co-operation with CNC burning tables control systems of various producers. The applied transistor technology enables increasing of cut quality, and decreasing of utility parts wear as well as decreasing of supply current from distribution network. Using of water-cooled torch the consumption of air decreased, and at the same time creation of smoke in the place of a cut became lower. Upon the customerīs request, it is possible to use more types of torches. When replacing the machine torch for manual and vice versa, one of the advantages of the device is that replacement of torch by means of central terminal is fast. |
- Emergency signalling of air input with blocking
- Emergency signalling of overheating with blocking
- Emergency signalling of coolant medium input with blocking
- Emergency signalling of output voltage of the source
- Possibility of using remote control
- Reduction valve with manometer and separator
- High - frequency circuit for contactless plasma arc start
- Continuos regulation of cutting current
|
Supply voltage |
400 V |
Number of phases |
3 |
Frequency |
50 Hz |
Nominal input |
38.5 kVA |
Nominal current |
55 A |
Power factor |
0.87 |
Efficiency |
83 % |
Suppression grade |
RO 3 |
Protection |
63 A |
Supply cable |
4 x 10 mm2 |
Setting range |
25 - 200 A |
Idle voltage max. |
310 V |
Working voltage |
160 V |
Thickness of index cut |
55 mm |
Thickness of quality cut |
50 mm |
Covering |
IP 21 |
Isolation class |
F |
Cooling |
AF |
Weight |
310 kg |
Dimensions |
1,000 x 515 x 1,140 mm | |
 |
 |