 |
| Powerful, efficient branch-off plasma cutting devices use air as plasma medium. There are two types of branch-off plasma cutting devices: with air-cooling or liquid-cooling of torch. With both devices, the client may choose a manual or an electric torch. Built-in high frequency ignition enables easy start of arch on the varnished or rusty material. A robust construction, big drive wheels and crane suspensory loops enable easy movement of these devices, even on the arduous surfaces as for example iron scrap sites. The devices are equipped with a reliable built-in electronic system with integrated safety functions of torch and transformer. And as for the aspect of security, the devices comply with all requirements of European standards. |
- Emergency signalling of air input with blocking
- Emergency signalling of overheating with blocking
- Torch central terminal
- Reduction valve with manometer and separator
- High frequency circuit for contactless start of plasma arc
- Three - degree step regulation of cutting current
|
| Supply voltage |
400 V |
| Number of phases |
3 |
| Frequency |
50/60 Hz |
| Input max. |
30 kVA |
| Power factor |
0.6 |
| Cutting current - position 1 |
30 A / 100% ED |
| Cutting current - position 2 |
60 A / 100% ED |
| Cutting current - position 3 |
100 A / 80% ED |
| Idle voltage |
350 V |
| Protection |
50 A |
| Torch cooling |
air / liquid |
| Isolation class |
F |
| Air pressure |
0.55 / 0.4 MPa |
| Air flow |
210 / 40 l/min |
| Thickness of cut - smooth cut |
25 mm |
| Thickness of cut - parting cut |
35 mm |
| Weight |
221 / 237 kg |
| Dimensions |
950 x 515 x 1,050 mm | |
|
|
