 |
| Air-cooled branch-off plasma cutting devices are characterized by their high efficiency and simple operation. To the simplicity of its operation contribute its emergency signalling system and signalling system of individual steps of operation. To the most important priorities of both sources belong high loading and low operation and maintenance costs. Due to its above mentioned loading and torch central terminal, manual or electric torches can be installed to these devices. As for the security is concerned, the devices comply with all requirements of the European standards. |
- Emergency signalling of air input with blocking
- Emergency signalling of overheating with blocking
- Emergency signalling of torch short circuit and blocking
- Emergency signalling of missing phase and blocking
- Torch central terminal
- Reduction valve with manometer and separator
- High frequency circuit for contactless start of plasma arc
- Three - degree step regulation of cutting current
|
| Supply voltage |
400 V |
| Number of phases |
3 |
| Frequency |
50/60 Hz |
| Input max. |
21 kVA |
| Power factor |
0.6 |
| Cutting current - position 1 |
30 A / 100% ED |
| Cutting current - position 2 |
50 A / 80% ED |
| Cutting current - position 3 |
75 A / 80% ED |
| Idle voltage |
350 V |
| Protection |
35 A |
| Torch cooling |
air |
| Isolation class |
F |
| Air pressure |
0.5 MPa |
| Air flow |
180 l/min |
| Thickness of cut - smooth cut |
15 mm |
| Thickness of cut - parting cut |
18 mm |
| Weight |
109 kg |
| Dimensions |
640 x 415 x 730 mm | |
|
|
