Plasma cutting device
ForCUT 50
Air-cooled branch-off plasma cutting devices are characterized by their high efficiency and simple operation. To the simplicity of its operation contribute its emergency signalling system and signalling system of individual steps of operation. To the most important priorities of both sources belong high loading and low operation and maintenance costs. Due to its above mentioned loading and torch central terminal, manual or electric torches can be installed to these devices. As for the security is concerned, the devices comply with all requirements of the European standards.
* Emergency signalling of air input with blocking
* Emergency signalling of overheating with blocking
* Emergency signalling of torch short circuit and blocking
* Emergency signalling of missing phase and blocking
* Torch central terminal
* Reduction valve with manometer and separator
* High frequency circuit for contactless start of plasma arc
* Two - degree step regulation of cutting current
Supply voltage 400 V
Number of phases 3
Frequency 50/60 Hz
Input max. 16 kVA
Power factor 0.6
Cutting current - position 1 30 A / 60% ED
Cutting current - position 2 50 A / 40% ED
Idle voltage 320 V
Protection 25 A
Torch cooling air
Isolation class F